Fujitsu SRS-9924-ABM Telephone User Manual


 
4
Fujitsu NI / 5E Custom Terminal Intro & Table of Contents
Repairs
Repairs to this equipment can only be made by the manufacturer or its
authorized agents. If this equipment is causing harm to the telephone
network, the telephone company may request that it be unplugged from
the modular outlet until the problem has been corrected. To obtain repair
service or warranty information, contact:
Technical Assistance Center
Fujitsu Network Communications, Inc.
1000 St. Albans Drive
Raleigh, NC 27609
(919) 790-2211 or 1-800-228-4736
Electrical Safety Advisory
We recommend the installation of an AC surge arrestor in the AC outlet to
which this equipment is connected. Telephone companies report that
electrical surges, typically lightning transients, are very destructive to customer
terminal equipment connected to AC power sources.
Preface
This guide provides descriptions and procedures for using Fujitsu’s Digital
Feature Phones (SRS-9924 and SRS-9912), when attached to a switch
supporting ISDN (National ISDN, referred to as NI or 5E Custom versions).
For assistance ordering National ISDN service from your local service provider,
see Appendix C.
The Fujitsu SRS-9924 and SRS-9912 are designed to optimize Centrex and
other ISDN voice services.
HOW TO USE THIS GUIDE
This section can help you make the most efficient use of this guide. The
section describes the overall organization, aids to finding information, and
conventions.