Fujitsu SRS-9924-ABM Telephone User Manual


 
5-18
5
NI / 5E Custom Terminal Installation
NI ONLY
3.
ENTER
TRANS KEY = (20) FA=20 or 61
COMPLETED
Note: If the user selects a key that cannot be
used for TRAN, the following display is shown:
SELECT ASSIGN KEY
INVALID SELECTION
Note: The terminal supports certain new
capabilities of National ISDN 97/98. If you wish
to assign the following features, the necessary
steps are shown below. The terminal will
operate using default values, if you do not
make assignments.
The terminal supports new ISDN features that allow
you to designate a line for originating calls. This
feature works with a complementary switch feature
that you can order from your telephone company.
It is called Call Appearance Reservation.
For these features to work properly, both the
terminal and the switch must be properly
configured.
The categories, described as “call appearance
reservation status” that you may select are listed
below.
Originating only: allows certain Directory
numbers or call appearances of Directory
Numbers to be used for outgoing calls only.
Terminating only: allows certain Directory
numbers or call appearances of Directory
Numbers to be used for incoming calls only.
Originating only/Priority Incoming only: allows
certain Directory numbers or call appearances
of Directory Numbers to be used for outgoing
calls and for incoming priority calls only.
Non-reserved: may be assigned to lines that have
no reservation status.
Selection 7:
Originating DN