5-12
5
NI / 5E Custom Terminal Installation
NI ONLY
• To assign another CA, press the desired button
and repeat steps 2 and 3.
• To return to normal operation, press OPTIONS.
• To make additional button assignments, press
asterisk (*). This returns you to the menu mode
main menu.
This completes programming of CAs. If you have
programmed your SPID, correctly completed this
procedure and your ISDN line is properly plugged
in you should now be ready to place and receive
voice calls. If you encounter problems, review
these items for accuracy.
1.
2 ENTER
FEATURE ACTIVATOR MODE
SELECT ASSIGN KEY
The set’s indicators show button status as follows:
• Green indicates a button already assigned to
a network feature.
• Red indicates a button already assigned to a
DN, CA or to Intercom or Intercom Group, or
to a local feature such as one-touch.
• Unlit indicates an unassigned button.
2. Press the button to which you want to assign
the network feature.
You can press any unlit or green multifunction
button. If you press a red button, the display shows
the message INVALID SELECTION, and the set
waits for you to press a valid button.
Selection 2:
Feature
Activator