Filter
Top Products
3-5
3
Using the NI / 5E Custom Terminal Set-Up
Correcting
Mistakes
Notes: If you enter a number with more than 16
digits, the 17th and subsequent digits appear
in the 16th number position, and previously
entered digits are shifted one column to the
left. (The digit in the first number position
disappears from the display, but is still recorded.)
If you try to exceed the 30-digit limit, the set
refuses the input and the display remains
unchanged.
4.
ENTER
DN=912229876543 (12)
COMPLETED
The associated LED turns green, and the word
COMPLETED appears, remaining for 6 seconds.
5. Press OPTIONS to return to the normal display.
Or To program or change another one-touch
number, press a multifunction button, then
repeat steps 3 & 4. Or To return to the menu
mode main menu, press asterisk (*).
How you correct a mistake depends on where you
are in the programming procedure:
• Before pressing ENTER to record the number,
press CLEAR to erase the number. Then enter
the correct number.
• After pressing ENTER, if the number on the
COMPLETED screen is incorrect, press the
multifunction button again. The ENTER
DIRECTORY NUMBER screen appears showing
the incorrect number. Enter the correct number
and then press ENTER. The correct number
appears on the display as you enter it and
replaces the incorrect number.