Fujitsu SRS-9924-ABM Telephone User Manual


 
3-11
3
Using the NI / 5E Custom Terminal Set-Up
UNA on All Call
Appearances
2. To enable UNA, press ENTER. This screen
appears:
1: ALL 2: SELECT
3: NO SUPPORT SELECT ITEM (1-3)
Note: If the following screen appears, press ENTER
to go to the selection screen.
UNA SERVICE MODE
SUPPORTED (SELECT)
To support UNA on all CAs, follow these steps:
1.
1 ENTER
SUPPORTED (ALL)
COMPLETED
After about 6 seconds, or if you press asterisk (*),
the display returns to the second menu mode
screen:
4: UNA 5: SPEAKER
6: HAND/HEAD SELECT ITEM (1-3)
2. You can now select a different menu function,
or press OPTIONS to return to the normal
display:
. . . . . . . . . . . . . . . . . . . . . . . . . . .
12:55PM TUE MAY 1
To support UNA on selected CAs, follow these steps:
1.
2 ENTER
SUPPORTED (SELECT)
SELECT ASSIGN KEY
If ALL (default) was previously set, all feature buttons
light green.
Only CAs with lit LEDs will log unanswered calls.
Press the buttons to turn the LEDs on or off to select
the CAs for which you want to log unanswered calls.
UNA on Selected
Call Appearances