Filter
Top Products
5-15
5
NI / 5E Custom Terminal Installation
NI ONLY
The set’s indicators show button status as follows:
• Green indicates a button already assigned to
a Directory Number.
• Red indicates a button already assigned to a
network feature or to a local feature such as
one-touch.
• Unlit indicates an unassigned button.
4. Press the button to which you want to assign
the Directory Number.
You can press any unlit or green multifunction
button. If you press a red button, the display shows
the message INVALID SELECTION and the set waits
for you to press a valid button.
• If you press a green button, the display shows
the current Directory Number assigned to that
multifunction button. You can either enter a
new Directory Number to replace the current
number or cancel the current number.
• If you press an unlit button, the screen looks
like this:
DIRECTORY NUMBER MODE
DN= (XX)
XX is the number of the multifunction button you
pressed. If you pressed a green-lit button, the
current Directory Number appears after DN=. The
new number you enter replaces this number.
5. You now have two choices:
• To add or change the DN assignment, enter
the Directory Number and then press ENTER.
• To cancel a DN assignment, press CLEAR
(softkey 3) and then press ENTER.