1-10
NI / 5E Custom Terminal Overview
1
For an incoming call, the calling party’s number
appears if the network supplies the digital set with
the Calling Line ID (CLID).
When your party answers, the call duration timing
is shown as minutes and seconds. This timer will
record for an hour, up to 59:59, and then it restarts
at 00:00. If the call cannot go through, line 2 shows
a message such as “BUSY” or “NOT ANSWERED”.
15m
15s
777-1111
15:15
1=777-1111
When you press MENU, line 2 of the display
changes to the names for the four keys directly
below the display (shown below). These keys are
called softkeys because the functions they control
change as you use the menus to set up different
features.
UNA L-DIR CLEAR OPTIONS
1234
Menu
Standard Softkey Layout
Note: Softkey 1 also serves as the ENTER key,
and Softkey 2 also serves as the NEXT key and
allows you to scroll through the menu options.
These softkey functions are explained in the
following chapters:
UNA Chapter 2
L-DIR Chapter 2
CLEAR Chapter 3
OPTIONS Chapter 3
ENTER Chapter 3
Other names and functions for these keys are
explained in various contexts throughout the text.
NI ONLY
5E CUSTOM ONLY
SOFTKEYS AND
MENU