2-6
2
Using the Terminal
5E CUSTOM ONLY
Method 2
Enter all numbers before you pick up the handset or
press the SPKR button.
1. Press the access code delimiter button. A colon
appears on the first line of the screen.
2. Dial the leased network access code. The access
code appears on the screen after the colon.
3. Press the delimiter key again. Another colon
appears on the screen after the access code.
4. Dial the number of the person you want to call.
The number appears on the screen after the
second colon.
5. To start the call, pick up the handset or press the
SPKR button. Your digital set automatically sends
the entered numbers and code to connect to
the leased network number.
FUNCTION
BUTTONS
The terminal has six function buttons, located to
the left of the numeric keypad.
Three buttons are permanently assigned to local
functions (REDIAL, HOLD, and SPKR) and the other
three buttons are usually assigned to CONFerence,
DROP and TRANsfer.
On NI, Fujitsu supports two sets of telephone
company assignments for network based features.
On the labeled function buttons for CONF, DROP,
and TRAN, Fujitsu sets accept the following values
or feature activators:
CONFERENCE Button 18
Activator 18 or 60
DROP Button 19
Activator 19 or 62
TRANSFER Button 20
Activator 20 or 61
Note: The SRS-9924 and SRS-9912 use the
same button numbers and Feature
Activators for the user assigned function
keys.
NI ONLY