Filter
Top Products
52 CHAPTER 5: STANDARD FEATURES
On a 3Com Basic Telephone:
1 Pick up the handset.
2 Press Feature + 440.
3 To turn off FWD MAIL, pick up the handset and press Feature + 440
again.
To set your default call forwarding destination, use the NBX NetSet utility.
See
“Default” later in this section.
To prevent the telephone from ringing even once, use the Do Not Disturb
feature (see
“Do Not Disturb” in Chapter 6) or use the Call Forward All
feature (see “Call Forward All” later in this section).
Call Forward No Answer, Call Forward Busy, and Call Forward All override
this Forward to Mail setting if they are in effect. If you turn off Forward to
Mail and no other call forward options are in effect, unanswered calls still
go to your default call coverage point but after the number of rings
specified in the NBX NetSet utility Call Forward > Call Forward page.
To view your current Forward to Mail setting, log in to NBX NetSet utility
and go to My Calling Privileges >
Feature Settings and see the status
for Forward All Calls to VM.
Call Forward No Answer
To set Call Forward No Answer:
1 Pick up the handset, and press Feature + 466.
2 Dial the number that you want to forward calls to and press
#
. If the
display shows the destination number you want, just press
#
to accept it.
3 To turn off Call Forward No Answer, pick up the handset and press
Feature + 466 again.
You can specify the number of rings before the call is forwarded by
logging in to the NBX NetSet utility and selecting the Call Forward >
Call Forward Override page. You specify the number of rings under the
Call Forward No Answer selection.