Filter
Top Products
110 CHAPTER 7: GETTING MORE FROM YOUR TELEPHONE SYSTEM
If the call is not answered within 5 minutes (default) after it is parked, it
rings again at the original telephone. Your administrator can modify the
length of this waiting period.
To park a call:
1 While you are on a call, press Feature + 444. Or press the Access button
assigned to Call Park.
2 Dial a Call Park extension from the list shown in Table 9 or the list of
extensions at your location.
If you select a Call Park extension that is already in use, Park Cancelled
appears on the display panel on your 3Com Telephone, and the call rings
back to your telephone. Try another Call Park extension.
To notify another user about the parked call:
■ From 3Com 3101 and 3101SP Basic Telephones, select an Access
button that is assigned for placing telephone calls, and dial the
user’s extension, or use the paging feature. See
“Paging” next for
details.
■ From a 3Com 2101 Basic Telephone, press and release the hook
switch. When you hear the dial tone, dial the user’s extension, or
use the paging feature. See
“Paging” next for details.
To retrieve a parked call:
1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension that was assigned to the call.
Paging Paging is the general term used to describe the act of broadcasting a
voice message through audio speakers.
You can:
■ Page all extensions with speakers on the system
This method uses default codes in Table 10.
■ Page a subset of all extensions on the system, called a zone.
This method uses extensions that the administrator configures for this
purpose.