Filter
Top Products
EXP1240 System Installation Guide Revision 06
© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 60 of 71
Table 22:
Firmware Update Settings
parameters
Parameter Description
Firmware update server
address
Enter the IP address or URL of the server that hosts the
firmware update files. This server must be available before
starting an update.
Firmware path
Enter the path of the firmware update folder (see Table 7 on
page 42).
Table 23:
Update Handsets
parameters
Parameter Description
Handset Type
If you have more than one hardware version or handset
model on your system, each detected handset type will be
displayed here.
Required Version
Enter the version of the firmware that will be used to update
each type of handset. This field must match the last 3 digits of
the name of the firmware file.
Firmware file versions are independent for each handset type. Be sure you
enter the correct version number for the specific type of handset.
If the required version field for any handset type contains any value other
than
0
, clicking Save will start the firmware update process for that handset
type.
Table 24:
Update Base stations
parameters
Parameter Description
Required Version
Enter the version of the firmware that will be used to
update the base station. This field must match the last 3
digits of the name of the firmware file.
Update this base station only
Update the firmware on the currently connected base
station.