Uniden EXP1240 Two-Way Radio User Manual


 
EXP1240 System Installation Guide Revision 06
© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 58 of 71
Parameter Description
Upload of SIP Log
Select
Enabled
to have this base station copy low-level SIP debug
messages onto the configuration server. SIP logs are named in the
format of
{MAC_address}_SIP_{timestamp}.log
. Unless you are
troubleshooting a specific problem, leave this log disabled.
Trace Server (for development purpose only)
Trace Server IP
Address
(for development purpose only)
Syslog Server IP
Address
Enter the IP address of the server you want the base station to
upload Syslogs to.
Syslog Server Port
If your syslog server is listening to a port other than 514 (the
default), enter that port number.
Syslog Level
Select the level of messages you want the base station to log:
Disabled
: the base station will not log any messages to the
server.
Normal Operation:
Normal operation events are logged,
incoming call, outgoing calls, handset registration, DECT
location, and call lost due to busy, critical system erroprs,
general system information. The Syslog Level should be at this
setting. The intended audience is Level 1 or 2 technical
support.
System Analyze
: Handset roaming events are logged at this
level plus Normal Operation logs. The intended audience is
Level 1 or 2 technical support.
Debug
: Low level debug logs plus System Analyse logs. The
intended audience are system developers.