Filter
Top Products
EXP1240 System Installation Guide Revision 06
© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 17 of 71
∘ If your network supports Dynamic DNS, then type
ipdect<{MAC}>
in the
address bar of your browser (just insert the MAC address of the base station
in place of
{MAC}
).
2) Enter the user ID and password. The default user ID and password are both
admin
(all
lower case). The base station opens the
Home/Status
screen.
Figure 9:
Home/Status
screen
• You can open any configuration screen by clicking its name on the left side of the
screen; the screen name links appear on every screen.
Configuring General System Settings
This document does not cover general IP and SIP network setup. If you need
more information on the necessary settings for your servers, contact your
network administrator.