Uniden EXP1240 Two-Way Radio User Manual


 
EXP1240 System Installation Guide Revision 06
© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 22 of 71
6) After the base station reboots, verify the time settings updates.
Check the
Home/Status
screen to be sure the time has updated correctly.
Check the
Time
screen to verify that the time server IP address is still
correct.
Figure 15: Checking time settings updates
Configuring the SIP Server Settings
1) If necessary, go to the
Network
screen (Figure 13) and verify that the parameters under
the
SIP/RTP Settings
are correct.
2) In the left panel of the screen, select
Servers
. This opens the
Servers
screen.
Figure 16:
Servers
screen
3) Click
Add Server
, then enter the necessary information for the first SIP server.