Filter
Top Products
EXP1240 System Installation Guide Revision 06
© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 31 of 71
Table 5: Sample multi-cell system information
Base Station RPN (assigned by system) Synchronization Source
Base #0 00 RPN 00 (self)
Base #1 04 RPN 00 (Base #0)
Base #2 08 RPN 00 (Base #0)
Base #3 0C RPN 04 (Base #1)
Base #4 10 RPN 08 (Base #2)
Base #5 14 RPN 0C (Base #3)
Base #6 18 RPN 10 (Base #4)
Base #7 1C RPN 10 (Base #4)
Setting Up a Multi-cell System
The table below shows a top-level summary of the steps needed to set up a multi-cell
system.
Table 6: Summary: Multi-cell system configuration
Step Screens used
1. Place the primary base station at its final location. NA
2. Configure the primary base station. Multicell
3. Reboot the primary base station and verify the settings. Home/Status
4. Place each Level 1 base station at its final location. NA
5. Configure each Level 1 base station and reboot.
Multi-cell
Home/Status
6. Synchronize each Level 1 base station. Multi-cell
7. Repeat the process with each Level 2 base station.
Multi-cell
Home/ Status
8. Repeat the process with any base stations at Level 3 through
Level 6.
Multi-cell
Home/Status