Filter
Top Products
EXP1240 System Installation Guide Revision 06
© 2013 Uniden America Corp. PROPRIETARY AND CONFIDENTIAL Page 27 of 71
Figure 18:
Extensions
screen, no handsets registered
2) Click
Register Handset(s)
to put the base station into registration mode. The base station
will remain in registration mode for 5 minutes.
3) On the handset, press Menu to open the menu screen.
4) Select
Connectivity
and then select
Register
.
5) When prompted, enter the base station registration Access Code. (The Access Code is
0000.)
6) Press the OK soft key to confirm.
7) Within a minute, the base station configuration screen will update with the new
information.
Figure 19:
Extensions
screen, one handset registered
8) Verify that the
Extension
and
Display Name
are correct and that the
State
shows
SIP
Registered
.
9) Make a quick test call to verify the handset is correctly registered.
10) Repeat the process for each extension.