Part 1 – AT Commands for All Universal IP Devices Chapter 4 – FTP AT Commands
Universal IP AT Commands Reference Guide (Document S000457K) 29
#FTPSERV – Specify FTP Server Address
Description: FTP server address. To connect to an FTP server to download files, the TCP/IP stack software
must know the address of the FTP server that is to be used.
Syntax: AT#FTPSERV="<value>"
AT#FTPSERV? Read or display the current setting (or AT#VFTP, AT#VALL).
Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx) or
Alphanumeric ASCII text string up to 120 characters if DNS is available. No default.
#FTPUN – Set FTP User Name
Description: Before transferring files from a specified FTP server, the TCP/IP stack software must open an
FTP session using a valid FTP user name.
Syntax: AT#FTPUN="<value>"
AT#FTPUN? Read or display the current setting (or AT#VFTP, AT#VALL).
Values: Alphanumeric ASCII text string up to 64 characters. No default.
#FTPPW – Set FTP Password
Description: Before transferring files from a specified FTP server, the TCP/IP stack software must open an
FTP session using a valid FTP password.
Syntax: AT#FTPPW="<value>"
AT#FTPPW? Read or display the current setting (or AT#VFTP, AT#VALL).
Values: Alphanumeric ASCII text string up to 64 characters. No default.
#FTPGETFILENAME – Set FTP Download File Name
Description: In order to download a file from the FTP server, the TCP/IP stack software must know the name
of the relevant file.
Syntax: AT#FTPGETFILENAME="<value>"
AT#FTPGETFILENAME? Read or display the current setting (or AT#VFTP, AT#VALL).
Values: Alphanumeric ASCII text string up to 120 characters. No default.
#FTPPUTFILENAME – Set FTP Upload File Name
Description: In order for the TCP/IP stack software to upload a file to the FTP server, the TCP/IP stack
software must know the name of the relevant file
Syntax: AT#FTPPUTFILENAME="<value>"
AT#FTPPUTFILENAME? Read or display the current setting (or AT#VFTP, AT#VALL).
Values: Alpha-numeric ASCII text string up to 120 characters. No default.
.