Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Wireless Office Headset User Manual


 
Part 6 AT Commands for GPS-Enabled Devices Chapter 16 – AT Commands for GPS-Enabled Devices
Universal IP AT Commands Reference Guide (Document S000457K) 95
#GPSGPVTGEnable/Disable GPVTG Message
Description: This command enables or disables the reporting of NMEA GPVTG messages.
Syntax: AT#GPSGPVTG=<value>
AT#GPSGPVTG? or AT#VGPS or AT#VALL
Values: 0 Disable
1 Enable
Default: 0
Responses: OK
Otherwise ERROR
#GPSINTERVALLOCGPS Local Transmission Interval
Description: This command sets the interval of time between messages transmitted to the local port.
Syntax: AT# GPSINTERVALLOC =<value>
AT# GPSINTERVALLOC? or AT#VGPS or AT#VALL
Values: 0 to 65535 (seconds)
Default: 0 (Disabled)
Responses: OK
Otherwise ERROR
#GPSGETMESSAGEGet Queued GPS Message
Description: This command gets the current queued GPS message. The response depends on which
messages have been enabled.
Syntax: AT#GPSGETMESSAGE
Responses: #GPSGETMESSAGE:
<enabled NMEA messages with prefix and urais>
OK