Filter
Top Products
Part 1 – AT Commands for All Universal IP Devices Chapter 6 – UDP AT Commands
Universal IP AT Commands Reference Guide (Document S000457K) 44
#UDPSERV – UDP Server Address
Description: If the UDP session is initiated in listen mode, use the IP address filter. This means that the
remote must have a defined UDPSERV IP address. If the UDP session is initiated in active mode,
use the remote IP address.
Syntax: AT#UDPSERV=<Value>
AT#UDPSERV? Read or display the current setting.
Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx) or Alphanumeric ASCII text string
up to 120 characters if DNS is integrated. No default.
#UDPTXDELAY – Delay before Sending UDP Datagram
Description: This parameter determines the delay before sending an UDP datagram that has not been entirely
filled with user data. The delay is expressed in milliseconds. The 0 value initiates the sending an
UDP datagram as soon as possible after the reception of a single character value from the host.
Syntax: AT#UDPTXDELAY=<Value>
AT#UDPTXDELAY? Read or display the current setting.
Values: Integer, multiple of 20 and between 0 and 32760 inclusive.
Default Value: 100