Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Wireless Office Headset User Manual


 
Part 3 AT Commands for Wi-Fi Devices Chapter 12 – Telnet AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K) 63
Chapter 12 – Telnet AT Commands for
the SocketWireless Wi-Fi and the
SocketEthernet IP
NOTE: The Telnet commands are used by the SocketEthernet IP (MT100SEM-IP) and the SocketWireless
Wi-Fi (MT810SWM-IP).
Set Commands
#TELNET Start/Stop Telnet Session
Description: Starts and stops a Telnet session.
Note: The module must be reset to put the command into effect.
Syntax: AT#TELNET=<0,1>
AT#TELNET? Read or display the current setting.
Values: 0 - Stop Telnet session.
1 - Start Telnet session; wait for remote to Telnet in.
Default: 0
Example: AT#TELNET?
0
OK
#TELNETPORTSet Telnet Port
Description: Sets Telnet port.
Note: The module must be reset to put the command into effect.
Syntax: AT#TELNETPORT = <port number>
AT#TELNETPORT? Read or display the current setting (or AT#VTELNET or AT#VALL)
Values: 1 to 65535
Default: 23
Example: AT#TELNETPORT?
23
OK
#TELNETUSER Set Telnet User
Description: Sets Telnet user.
Note: The module must be reset to put the command into effect.
Syntax: AT#TELNETUSER= “<64 char string>”
AT# TELNETUSER? Read or display the current setting (or AT#VTELNET or AT#VALL).
Default: admin
Example: AT#TELNETUSER?
admin
OK