Index
Universal IP AT Commands Reference Guide (Document S000457K) 113
#TCPPACKETMAX – TCP Client Transmit Packet
Maximum Size .......................................................... 35
#TCPPACKETMIN – TCP Client Transmit Packet Minimum
Size ........................................................................... 35
#TCPPORT – Set TCP Port for Remote Peer ................ 34
#TCPSERV – Set Address of Remote TCP Server ....... 34
#TCPTELNETMODE – Enable/Disable TCP Listener Telnet
Protocol ..................................................................... 37
#TCPTELNETPW – Configure the TCP Client Telnet
Server Login Password ............................................. 37
#TCPTELNETUN – Set the TCP Client Telnet Server User
Name ........................................................................ 38
#TCPTXDELAY – Time Delay ......................................... 34
#UDPDLEMODE – Set DLE Mode .................................. 45
#UDPIGNORESRCPORT – Ignore Send Source Port ..... 43
#UDPINACTIVITYTIMER – UDP Client Inactivity Timeout
Value ......................................................................... 42
#UDPPACKETMAX – UDP Client Transmit Packet
Maximum Size .......................................................... 42
#UDPPACKETMIN – UDP Client Transmit Packet Minimum
Size ........................................................................... 41
#UDPPORT – UDP Port Number .................................... 43
#UDPREMPOTEPORT – Remote Port Number ............... 43
#UDPSERV – UDP Server Address................................ 44
#UDPTXDELAY – Delay before Sending UDP Datagram
.................................................................................. 44
#VALL – Display All Parameters ....................................... 18
#VFTP – Display FTP Parameters .................................... 32
#VMAILi – Display Email Parameters for Mail ID .............. 25
#VPHY – Display Physical Parameters............................. 86
#VPING – Display PING Parameters .............................. 48
#VPOP3 – POP3 Module Parameters .............................. 27
#VPPP – Display PPP Parameters ................................... 86
#VSHOWSERIAL – Configure the Escape Character for
DLEMODE ................................................................ 15
#VSHOWUPTIME – Displays the Current Uptime in Days,
Hrs, Mins, Secs ......................................................... 16
#VSHOWUPTIMES – Displays the Current Uptime in Secs
.................................................................................. 16
#VSMTP – Display SMTP Parameters ............................. 25
#VSTATE – Display Current State of Physical Connection
.................................................................................. 16
#VTCP – Display TCP Parameters ................................. 40
#VUDP – Display UDP Module Configuration ............... 46
#VVERSION – Display Software Version ......................... 16
&C – RLSD (DCD) Option ................................................. 11
&D – DTR Option .............................................................. 11
&F – Reset Factory Defaults ............................................. 11
&S – DSR On or Off .......................................................... 11
&W – Store Factory Defaults to NVM................................ 12
+ICF – DTE-DCE Character Framing ............................... 12
+IFC – Set Flow Control ................................................... 13
+IPR – Set Serial Speed ................................................... 13
+WOPEN – Mode of Operation......................................... 74
AT – Command Mode ....................................................... 10
E – Turn Echo ON/OFF .................................................... 10
I – Identification ................................................................. 10
V – Terse or Verbose ........................................................ 10
Z – Default Configuration .................................................. 11
Commands for SocketEthernet IP
#AUTODISC – Auto Discovery On or Off .......................... 54
#AUTODISCHOST – Set Auto Discovery Host Name ...... 54
#AUTODISCPASSWORD – Set Auto Discovery Password
.................................................................................. 55
#AUTODISCPORT – Auto Discovery Port ........................ 54
#AUTODISCTIMER – Auto Discovery Timer .................... 54
#AUTODISCUSERNAME – Set Auto Discovery User Name
.................................................................................. 55
#BODYi – Set Pre-Defined Email Combinations ............... 21
#CCRECi – Set Additional Recipient CC .......................... 19
#DELFLASH – Erase Flash Memory Parameter Values ... 13
#DHCP – DHCP On or Off ............................................... 50
#DLEMODE – Set DLE Mode .......................................... 33
#DNSSERV1 – Set DNS Server IP Address ..................... 51
#DNSSERV2 – Set Secondary DNS Server ..................... 51
#DOMAIN – Set Domain Name of the Sender .................. 20
#EMACSPD – Set Ethernet Connection ........................... 51
#ESCAPECHAR – Configure the Escape Character for
DLEMODE ................................................................ 15
#ETHIFSTATUS – View Network Interface Settings ......... 52
#FTPAPPEND – Append Data to Server ........................ 31
#FTPGET – Download Files from FTP Server .................. 30
#FTPGETFILENAME – Set FTP Download File Name ..... 29
#FTPGETPATH – Set Path to Get Files from FTP Server 31
#FTPMODE – Enter FTP Mode ........................................ 28
#FTPNETWORKTIMER – FTP Client Network Transmit
Safety Timeout Value ................................................ 32
#FTPPORT – Enter FTP Server Port ................................ 28
#FTPPUT – Upload Files to FTP Server ........................... 30
#FTPPUTFILENAME – Set FTP Upload File Name ......... 29
#FTPPUTPATH – Set Path to Send Files to FTP Server
.................................................................................. 31
#FTPPW – Set FTP Password ......................................... 29
#FTPSERV – Specify FTP Server Address ...................... 29
#FTPTYPE – Specify Data Type....................................... 28
#FTPUN – Set FTP User Name ........................................ 29
#GETMAIL – Retrieve Host Mail ....................................... 27
#HOSTNAME – Configure the DHCP Client Host Name .. 52
#IPADDR – Set Static IP Address .................................. 50
#IPGATEWAY – Set Gateway Address .......................... 50
#IPNETMASK – Set Subnet Mask .................................... 51
#LTCPSTART – Open Listening Mode .......................... 38
#LTCPSTOP – Close TCP Listening Mode .................... 39
#LUDPSTART – Initiate the UDP Session in Listen
Mode ........................................................................ 45
#LUDPSTOP – Close UDP Listening Mode ................... 46
#OTCP – Open a TCP Connection ................................. 39
#OUDP – Initiate UDP Session in Active Mode ............ 46
#OUTPORT – UDP/TCP Local Port Number .............. 39, 46
#PING – Start PING Request .......................................... 47
#PINGDELAY – PING Delay Time .................................. 47
#PINGNUM – Number of PING Requests ...................... 47
#PINGREMOTE – IP Address of PING Request ............ 47
#POP3HEADERMODE – POP3 Header .......................... 26
#POP3PORT – Set POP3 Server Port ............................. 26
#POP3PW – Set POP3 Password .................................... 26
#POP3SERV – Set POP3 Server Address ....................... 26
#POP3UN – Set POP3 User Name .................................. 27
#PUTMAIL – Send Mail to Recipient with Interactive Mode
.................................................................................. 24
#RECiADD – Set Email Address....................................... 20
#RESET – Reset Main Processor or Internal Modem ....... 14
#SENDERADDR – Set Sender Address ........................... 19
#SENDERNAME – Set Sender Name .............................. 19
#SENDMAILi – Send Mail without Interactive Mode ......... 23
#SHIELDCHAR – Configure the Shielding Character for
DLEMODE ................................................................ 14
#SMTPAUTH – Authentication ON or OFF ....................... 25
#SMTPNETWORKTIMER – SMTP Client Network Transmit
Safety Timeout Value ................................................ 21
#SMTPPORT – Set SMTP Server Port ............................. 21
#SMTPPW – Set SMTP Password ................................... 22
#SMTPSERV – Set SMTP Server Address ...................... 22
#SMTPUN – Set SMTP User Name ................................. 22
#SUBJi – Set Email Pre-Defined Subject .......................... 20
#TCPINACTIVITYTIMER – TCP Client Inactivity Timeout
Value ......................................................................... 36