Filter
Top Products
Part 1 – AT Commands for All Universal IP Devices Chapter 5 – TCP AT Commands
Universal IP AT Commands Reference Guide (Document S000457K) 40
Display Command
#VTCP – Display TCP Parameters
Description: This command directs the TCP/IP stack to display all the AT# parameters related to the TCP
socket configuration.
Syntax: AT#VTCP=id or AT#VTCP
Note: If you use AT#VTCP=id, the parameters for profile 1 or profile 2 will display. If you use
AT#VTCP, the parameters for both Profile 1 and Profile 2 will display.
Example:
Command
Possible Responses
AT#VTCP
Note: View TCP parameters
of the TCP socket 2
#DLEMODE: 1 , 1
#TCPSERV: 1 , ”... ”
#TCPPORT: 1 , 0
#TCPTXDELAY: 1 , 100
#DLEMODE: 2 , 1
#TCPSERV: 2 , ”...”
#TCPPORT: 2 , 0
TCPTXDELAY: 2 , 100
OK