Filter
Top Products
Part 4 – AT Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell Chapter 14
Universal IP AT Commands Reference Guide (Document S000457K) 86
#VPPP – Display PPP Parameters
Description: This command directs the TCP/IP stack to display all the AT# parameters related to the PPP
layer configuration.
Values: Read Parameters:
ISPPW
ISPUN
PPPMYIP
PPPPEERIP
Syntax: AT#VPPP
Command
Possible Responses
AT#VPPP
#ISPUN: “myispun”
#ISPPW: “myisppwd:
#PPPMODE: 1
#PPPMYIP: “0.0.0.0”
#PPPPEERIP: “0.0.0.0”
OK
#VPHY – Display Physical Parameters
Description: This command directs the TCP/IP stack to display all the AT# parameters related to the physical
layer configuration.
Syntax: AT#VPHY
Command Possible Responses
AT#VPHY #ANSWERMODE: 0
#CALLBACKTIMER: 2
#CALLSCREENNUM: “0”
#DIALN1: “”
#DIALN2: “”
#DIALSELECT: 1
#PHYTIMEOUT: 15
#REDIALCOUNT: 5
#REDIALDELAY: 5
#RINGCOUNT: 0
OK
Values: ANSWERMODE
CALLBACKTIMER
CALLSCREENNUM
DIALN1
DIALN2
DIALSELECT
PHYTIMEOUT
REDIALCOUNT
REDIALDELAY
RINGCOUNT