Filter
Top Products
Part 3 – AT Commands Wi-Fi Devices Chapter 13 – WLAN AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K) 65
Chapter 13 – WLAN AT Commands for
the SocketWireless Wi-Fi
Set Commands
#WLANSECURITYMODE – Security Mode of WLAN Module
Description: Sets the Wireless LAN security mode.
Note: The module must be reset to put the command into effect.
Syntax: AT#WLANSECURITYMODE =<value>
AT#WLANSECURITYMODE? Read or display the current setting.
Values: 0 - Security Disable
1 - WEP64 Security
2 - WEP128 Security
3 - WPA Security
4 - WPA2 Security
Default: 0 Security Disable
#WLANNETWORKMODE – WLAN Network Mode
Description: Sets the wireless LAN network mode.
Note: The module must be reset to put the command into effect.
Syntax: AT#WLANNETWORKMODE =<value>
AT#WLANNETWORKMODE? Read or display the current setting.
Values: 0 - Infrastructure mode
1 - Ad – Hoc mode
Default: 0 Infrastructure mode
#WLANCOUNTRYCODE – Country Code
Description: Sets country code. Different countries have different restrictions on Wireless LAN parameters like
operating channels and transmit power. To make it operable, the country code can be set by
using this AT command.
Note: The module must be reset to put the command into effect.
Syntax: AT#WLANCOUNTRYCODE ="<value>"
AT#WLANCOUNTRYCODE? Read or display the current setting.
Values: Country Code FCC - US:
AT#WLANCOUNTRYCODE="DOMAIN_FCC"
Supported Channels - Channel 1 to channel 11
Country Code IC - Canada:
AT#WLANCOUNTRYCODE="DOMAIN_IC"
Supported Channels - Channel 1 to channel 11
Country Code ETSI - Europe:
AT#WLANCOUNTRYCODE="DOMAIN_ETSI"
Supported Channels - Channel 1 to channel 13
Supported Channels - Channel 10 to channel 13
Default: DOMAIN_FCC (For US)