Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Wireless Office Headset User Manual


 
Part 4 AT Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell Chapter 14
Universal IP AT Commands Reference Guide (Document S000457K) 80
#DIALSELECTSet Internet Connection Number
Description: The value of this command determines the number called to establish an Internet connection. It
configures the TCP/IP stack software to use the primary dial-up number or the secondary dial-up
number.
Syntax: AT#DIALSELECT=<value>
AT#DIALSELECT? Read or display the current setting (or AT#VPHY, AT#VALL).
Values: 1 - se primary dial-up number.
2 - Use secondary dial-up number
Default: 1
#ISPPWSet ISP Password
Description: This parameter sets the password for the ISP account. When communication is initiated and once
the physical (modem) connection has been established with the ISP, the TCP/IP stack software
must provide the ISP with the password associated with the account to be used.
Syntax: AT#ISPPW="<value>"
AT#ISPPW? Read or display the current setting (or AT#VPPP, AT#VALL).
Values: Alpha-numeric ASCII text string up to 64 characters.
Default: None
#ISPUNSet ISP User Name
Description: This parameter sets the user name of the ISP account. When communication is initiated and the
physical (modem) connection has been established with the ISP, the TCP/IP stack software must
provide the ISP with the user name associated with the account to be used.
Syntax: AT#ISPUN="<value>"
AT#ISPUN? Read or display the current setting (or AT#VPPP, AT#VALL).
Values: Alpha-numeric ASCII text string up to 64 characters.
Default: None