Filter
Top Products
Part 1 – AT Commands for All Universal IP Devices Chapter 1 – General AT Commands for All Universal IP Devices
Universal IP AT Commands Reference Guide (Document S000457K) 17
#VALL – Display All Parameters
Note: The MT100SEM display of Possible Responses differs slightly from the MT5692SMI-IP display.
An example of the MT100SEM Possible Responses screen is included on this page. See the
next page for an example of the other Possible Responses screen.
Description: This command directs the TCP/IP stack to display all AT# parameters. The parameters are
displayed by blocks of categories separated by a <CR><LF> sequence, all at the same time.
Syntax: AT#VALL
Possible Responses – MT100SEM-IP
#FTPGETFILENAME: " "
#FTPGETPATH: " "
#FTPMODE: 0
#FTPPORT: 21
#FTPPUTFILENAME: " "
#FTPPUTPATH: " "
#FTPPW: "ftppassword"
#FTPSERV: " "
#FTPTYPE: 1
#FTPUN: “ftplogin”
#POP3HEADERMODE: 1
#POP3PORT: 110
#POP3PW: "password"
#POP3SERV: "pop3.domain.com"
#POP3UN: "module@domain.com"
#DOMAIN: "domain.com"
#SENDERADDR: "module@domain.com"
#SENDERNAME: "Test module"
#SMTPPORT: 25
#SMTPPW: " "
#SMTPSERV: "smtp.domain.com"
#SMTPUN: " "
#SMTPAUTH: 1
#BODY1: " "
#CCREC1: " "
#REC1: " "
#SUBJ1: "Email Subject"
#BODY2: " "
#CCREC2: " "
#REC2: " "
#SUBJ2: " "
#BODY3: " "
#CCREC3: " "
#REC3: " "
#SUBJ3: " "
#DLEMODE: 1 , 1
#TCPSERV: 1 , " "
#TCPPORT: 1 , 0
#TCPTXDELAY: 1 , 100
#DLEMODE: 2 , 1
#TCPSERV: 2 , " "
#TCPPORT: 2 , 0
#TCPTXDELAY: 2 , 100
#UDPSERV: 1 , " "
#UDPPORT: 1 , 0
#UDPTXDELAY: 1 , 100
#UDPSERV: 2 , " "
#UDPPORT: 2 , 0
#UDPTXDELAY: 2 , 100
#PINGDELAY: 1
#PINGNUM: 4
#PINGREMOTE: " "
#DHCP: 0
#IPADDR: "192.168.2.3"
#IPGATEWAY: "192.168.2.1"
#IPNETMASK: "255.255.255.0"
#EMACSPD: 0
#DNSSERV1: "0.0.0.0"
#DNSSERV2: "0.0.0.0"
#TELNET: 0
#TELNETPORT: 23
#TELNETUSER: "admin"
#TELNETPASSWORD: " "
+IPR: 115200
+ICF: 2,4
+IFC: 2,2
#AUTODISC: 1
#AUTODISCPORT:1020
#AUTODISCTIMER: 10
#AUTODISCHOST: "MT100SEM"
#AUTODISCUSER: "admin"
#AUTODISCPASSWORD: " "
V: 1
&S: 0
&C: 0
OK