Multi-Tech Systems iCell GPRS (MTSMC-G2-IP Wireless Office Headset User Manual


 
Part 3 AT Commands Wi-Fi Devices Chapter 13 – WLAN AT Commands for the SocketWireless Wi-Fi
Universal IP AT Commands Reference Guide (Document S000457K) 68
#WLANPROFILEn=n – Change the WLAN Profile
Description: This command changes the WLANPROFILE.
Syntax: AT#WLANSETPROFILEn=n,"<SSID>",<Security Mode>,<Key Index>,"< Passphrase>"
AT#WLANSETPROFILEn?
Values: 1, 2, 3, 4
Parameters: ssid = up to 32 characters ssid
security mode = 0 (no encryption)
1 (wep64)
2 (wep128)
3 (wpa-psk)
4 (wpa2-psk)
keyindex = 1 to 4 applicable for security option (1-4)
passphrase = ASCII text string of hexadecimal numbers applicable for security modes 1-2.
passphrase = ASCII text string applicable for security modes 3-4.
(10 ASCII text string of hexadecimal numbers for wep64)
(26 ASCII text string of hexadecimal numbers for wep128)
(8-63 ASCII text string for wpa-psk)
(8-63 ASCII text string for wpa2-psk)
Notes: Keyindex and passphrase are not applicable for security option (0)
Examples: AT#WLANPROFILE1=1,"MT_NOENC",0 ( for no encryption mode)
AT#WLANPROFILE2=2,"MT_WEP64",1,1,"1234567890" (for wep64 key)
AT#WLANPROFILE3=3,"MT_WEP128",2,1,"12345678901234567890123456"(for wep128)
AT#WLANPROFILE4=4,"MT_WPA",3,1,"12345678" (for WPA psk mode)
AT#WLANPROFILE4=4,"MT_WPA2",4,1,"12345678" (for WPA2 psk mode)
#WLANSCANScan Wireless Networks
Description: Scans all the APs (access points) in the environment and displays information about their settings
and capabilities on HyperTerminal or similar program.
Syntax: AT#WLANSCAN
Example: ESSID: Plan B
BSSID: 00:08:00:C0:30:99
Channel Num: 6
RSSI: -61
Network Type: BSS
Security: No Enc
Capability: 0x1
WLAN Mode: B Mode