Filter
Top Products
Part 2 – AT Commands for the SocketEthernet IP Chapter 8 – General AT Commands for SocketEthernet IP
Universal IP AT Commands Reference Guide (Document S000457K) 52
#HOSTNAME – Configure the DHCP Client Host Name
Description: Configures the device host name reported to the DHCP server.
Note: This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)
Syntax: AT#HOSTNAME="<parameter1>"
AT#HOSTNAME? Read or display the current setting.
Values: parameter 1
Host name (up to 64 alpha-numeric characters)
Responses: \r\n#HOSTNAME: "VALUE"
\r\nOK\r\n
\r\nERROR\r\n
Command Example(s):
send: AT#HOSTNAME="Device9876"\r
reply: \r\nOK\r\n
send: AT#HOSTNAME?\r
reply: \r\n#HOSTNAME: "Device9876"\r\n
reply: \r\nOK\r\n
Display Commands
#ETHIFSTATUS – View Network Interface Settings
Description: Display the address settings.
Syntax: AT#ETHIFSTATUS
Values: None
Display Example: INTERFACE: UP
LINK: UP
IPADDR: 192.168.2.3
IPGATEWAY: 192.168.2.1
IPNETMASK: 255.255.255.0
MACADDR: 00:00:00:00:00:00
DNSSERV1: 0.0.0.0.
DNSSERV2: 0.0.0.0.
DNSSERV3: 0.0.0.0.
DNSSERV4: 0.0.0.0.
#VDNS – Display Configuration of DNS Servers
Description: This command the TCP/IP stack to display all AT# parameters related to the configuration of the
DNS servers. Note: This is displayed only when DHCP is OFF.
Syntax: AT#VDNS
Values: None