Index
Universal IP AT Commands Reference Guide (Document S000457K) 112
Authentication ON or OFF – #SMTPAUTH ....................... 25
Authentication Type – #AUTHENT ................................... 74
Auto Connect Module with AP – #WLANENABLE ............ 67
Auto Discovery On or Off – #AUTODISC.......................... 54
Auto Discovery Port – #AUTODISCPORT ........................ 54
Auto Discovery Timer – #AUTODISCTIMER .................... 54
Automatic Answer – S0= .................................................. 59
Automatic Call-Back Wait – #CALLBACKTIMER .............. 76
Automatically Connect the PPP Link –
#AUTOCONNECTION .................................................. 83
C
Call Retry Delay – #REDIALDELAY ................................. 78
Caller ID – #CALLSCREENNUM ...................................... 76
Change the WLAN Profile – #WLANPROFILEn=n ........... 68
Channel for Ad-Hoc Mode – #WLANIBSSCHANNEL ....... 66
Close TCP Listening Mode – #LTCPSTOP .................... 39
Close UDP Listening Mode – #LUDPSTOP ................... 46
Command Mode – AT ....................................................... 10
Commands for Modems with GPS
#GPSGETMESSAGE – Get Queued GPS Message ........ 95
#GPSGPGGA – Enable/Disable GPGGA Message ......... 93
#GPSGPGLL – Enable/Disable GPGLL Message ............ 94
#GPSGPGSA – Enable/Disable GPGSA Message .......... 94
#GPSGPGSV – Enable/Disable GPGSV Message .......... 94
#GPSGPRMC – Enable/Disable GPRMC Message ......... 94
#GPSGPVTG – Enable/Disable GPVTG Message ........... 95
#GPSINTERVAL – GPS Server Transmission Interval ..... 93
#GPSINTERVALLOC – GPS Local Transmission Interval 95
#GPSPORT – GPS Host Port ........................................... 92
#GPSPREFIX – GPS Message Prefix .............................. 92
#GPSPROTO – GPS Host Protocol.................................. 92
#GPSPW – GPS Host Login Password ............................ 93
#GPSSERV – GPS Host Server Address ......................... 92
#GPSURAIS – GPS Unique Remote Asset Identification
String ........................................................................ 93
Commands for MultiModem iCell
#ACCEPT – Answer Incoming Call ................................... 81
#ANSWERMODE – Set Answering Mode ........................ 75
#APNPW – Access Point Name Password ....................... 84
#APNSERV – Access Point Name ................................... 84
#APNUN – Access Point User Name................................ 84
#ATCMD – Customize Dial-Up Commands ...................... 78
#AUTHENT – Authentication Type ................................... 74
#AUTOCONNECT – Automatically Connect the PPP Link
.................................................................................. 83
#AUTORESET – Reset Main Processor at a Given Time. 13
#BODYi – Set Pre-Defined Email Combinations ............... 21
#CALLBACKTIMER – Automatic Call-Back Wait .............. 76
#CALLSCREENNUM – Caller ID ...................................... 76
#CCRECi – Set Additional Recipient CC .......................... 19
#CONNECTIONSTART – Start Communication ............... 82
#CONNECTIONSTOP – Stop Communication ................. 81
#DELFLASH – Erase Flash Memory Parameter Values ... 13
#DIALN1 – Primary Dial-Up Number ................................ 79
#DIALN2 – Secondary Dial-Up Number............................ 79
#DIALSELECT – Internet Connection Number ................. 80
#DISPLAYIP – Display IP Addresses ............................... 85
#DLEMODE – Set DLE Mode .......................................... 33
#DOMAIN – Set Domain Name of the Sender .................. 20
#ESCAPECHAR – Configure the Escape Character for
DLEMODE ................................................................ 15
#FTPAPPEND – Append Data to Server ........................ 31
#FTPGET – Download Files from FTP Server .................. 30
#FTPGETFILENAME – Set FTP Download File Name..... 29
#FTPGETPATH – Set Path to Get Files from FTP Server 31
#FTPMODE – Enter FTP Mode ........................................ 28
#FTPNETWORKTIMER – FTP Client Network Transmit
Safety Timeout Value ................................................ 32
#FTPPORT – Enter FTP Server Port ................................ 28
#FTPPUT – Upload Files to FTP Server ........................... 30
#FTPPUTFILENAME – Set FTP Upload File Name ......... 29
#FTPPUTPATH – Set Path to Send Files to FTP Server
.................................................................................. 31
#FTPPW – Set FTP Password ......................................... 29
#FTPSERV – Specify FTP Server Address ...................... 29
#FTPTYPE – Specify Data Type....................................... 28
#FTPUN – Set FTP User Name ........................................ 29
#GETMAIL – Retrieve Host Mail ....................................... 27
#GPRSCID – PDP Context Identifier ................................ 85
#GPRSMODE – Switch Between GSM and GPRS .......... 85
#ISPPW – ISP Password .................................................. 80
#ISPUN – ISP User Name ................................................ 80
#KEEPALIVEDELAY – Keep-Alive Delay ......................... 77
#KEEPALIVEMODE – Keep-Alive Mode .......................... 76
#KEEPALIVEPORT – Keep-Alive Port Number ................ 77
#KEEPALIVESERV – Keep-Alive Server Address ........... 77
#LEGACYMODE – Legacy Mode Enable/Disable ............ 14
#LTCPSTART – Open Listening Mode .......................... 38
#LTCPSTOP – Close TCP Listening Mode .................... 39
#LUDPSTART – Initiate the UDP Session in Listen
Mode ........................................................................ 45
#LUDPSTOP – Close UDP Listening Mode ................... 46
#OTCP – Open a TCP Connection ................................. 39
#OUDP – Initiate UDP Session in Active Mode ............ 46
#OUTPORT – UDP/TCP Local Port Number ........ 39, 46, 77
#PERSISTENTSOCKET – Persistent Socket ............. 33, 41
#PHYTIMEOUT – Inactivity Timer .................................... 78
#PING – Start PING Request .......................................... 47
#PINGDELAY – PING Delay Time .................................. 47
#PINGNUM – Number of PING Requests ...................... 47
#PINGREMOTE – IP Address of PING Request ............ 47
#POP3HEADERMODE – POP3 Header .......................... 26
#POP3PORT – Set POP3 Server Port ............................. 26
#POP3PW – Set POP3 Password .................................... 26
#POP3SERV – Set POP3 Server Address ....................... 26
#POP3UN – Set POP3 User Name .................................. 27
#PPPMODE – TCP/IP Behavior ....................................... 83
#PPPMYIP – IP Address When Using PPP ...................... 83
#PPPPEERIP – IP Address for Remote PPP ................... 84
#PPPSERVPW – Remote PPP Client Password .............. 84
#PPPSERVUN – User Name for Remote PPP Client ....... 84
#PUTMAIL – Send Mail to Recipient with Interactive Mode
.................................................................................. 24
#RECiADD – Set Email Address....................................... 20
#REDIALCOUNT – Connection Attempts Allowed............ 78
#REDIALDELAY – Call Retry Delay ................................. 78
#RESET – Reset Main Processor or Internal Modem ....... 14
#RINGCOUNT – Set Number of Rings ............................. 79
#SENDERADDR – Set Sender Address ........................... 19
#SENDERNAME – Set Sender Name .............................. 19
#SENDMAILi – Send Mail without Interactive Mode ......... 23
#SHIELDCHAR – Configure the Shielding Character for
DLEMODE ................................................................ 14
#SMTPAUTH – Authentication ON or OFF ....................... 25
#SMTPNETWORKTIMER – SMTP Client Network Transmit
Safety Timeout Value ................................................ 21
#SMTPPORT – Set SMTP Server Port ............................. 21
#SMTPPW – Set SMTP Password ................................... 22
#SMTPSERV – Set SMTP Server Address ...................... 22
#SMTPUN – Set SMTP User Name ................................. 22
#SUBJi – Set Email Pre-Defined Subject .......................... 20
#TCPINACTIVITYTIMER – TCP Client Inactivity Timeout
Value ......................................................................... 36
#TCPNETWORKTIMER – TCP Client Network Transmit
Safety Timeout Value ................................................ 36