Lucent Technologies 555-661-150 IP Phone User Manual


 
MERLIN LEGEND Communications System Release 6.1
Network Reference
555-661-150
Issue 1
August 1998
Voice/Fax Messaging Systems
Page C-2Supported System Considerations
C
Supported System Considerations 3
The following are considerations for voice messaging systems used for
centralized automated attendant on MERLIN LEGEND Communications System
Release 6.0 Version 11 and later systems.
MERLIN LEGEND System 3
For Release 6.1 and later systems, the number of dialed digits for the non-local
UDP range for a given pattern must be entered in a new system programming
screen (14.515). To access this screen, select
6\V5HQXPEHU.1RQ/RFDO8'3.Enter
first extension number in range.
;
.Enter last extension number in
range.
;
.Enter number of dialed digits for the range.
;
.
Intuity AUDIX 3
All local and non-local UDP stations must be administered on Intuity
AUDIX.
Within Intuity AUDIX, the parameter “transfer to subscribers only” must be
administered so as to ensure that Intuity AUDIX will deny transfers to all
but local and non-local UDP stations.
When optioned for MERLIN LEGEND systems, Intuity AUDIX can handle
3- or 4-digit dial plans (but not both simultaneously). For example, you
cannot have a 3-digit dial plan for one site and a 4-digit dial plan at another
site. Note that since a 5-digit dial plan is not supported by Intuity AUDIX
when optioned for MERLIN LEGEND systems, one of the work-arounds
described in Chapter 5 must be used to route calls to DEFINITY ECS or
DEFINITY ProLogix or the DEFINITY must have a 4-digit dial plan.
The MAP/5P platform supports 500 subscribers, the MAP/40 supports
3000 subscribers, and the MAP/100 supports 6000 subscribers.
Beginning with Intuity AUDIX R4, enhanced transfer security is available by
administering the allowed numbers list. Unless an extension (local and
non-local UDP) appears in this list, calls will not be transferred to that
number.
MERLIN LEGEND Mail 3
MERLIN LEGEND Mail should be set up with “Transfer to Subscriber-Only
Restrictions.”
For local UDP extensions, call answer mailboxes (up to 100) should be
used.
For non-local UDP numbers, transfer-only mailboxes should be used. The
maximum number of mailboxes of both types is 375.