Filter
Top Products
4-11
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Chapter 4 Basic Setup—CiscoWorks 1105/1130/1130-19
Logging into the Web Interface and Verifying Connectivity
Step 3 Configure Netscape Navigator to accept all cookies:
a. Expand Privacy & Security and select Cookies.
b. Select Enable all cookies.
c. Click OK.
Step 4 Change the default font for improved readability:
a. Expand Appearance and select Fonts.
b. From the Proportional list, select Sans Serif and a font size.
c. From the Sans-serif list, select the desired font.
d. Click OK.
Note Some fonts do not change after you use this option.
Step 5 Disable caching:
a. Expand Advanced and click Cache. If no subcategories are listed,
double-click Advanced to expand the list.
b. Under “Compare the page in the cache to the page on the network,” select
“Every time I view the page.”
Logging into the Web Interface and Verifying
Connectivity
Note Disable pop-up blocker software while using the WLSE web interface.
To verify HTTP and HTTPS connectivity, connect to the WLSE using a
supported, properly configured Web browser and perform the following steps:
Step 1 To verify HTTP connectivity, enter the system IP address, followed by :1741 (the
default port number).