Filter
Top Products
Appendix A Installing Software—CiscoWorks 1105/1130/1130-19
Upgrade Methods
A-4
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Upgrading by Using the Web Interface
This section contains the following topics:
• Upgrade quick reference.
• Alternative upgrade procedures:
–
Installing from the Local Repository, page A-4
–
Installing from a Windows Server, page A-6
Quick Reference
The basic tasks in installing software upgrades by using the Web interface are
listed in below. See the referenced sections for details about these tasks.
Installing from the Local Repository
Use this procedure to install from a local repository on the WLSE.
Procedure
Step 1 Log in via Telnet or SSH as the admin user on a WLSE.
Step 2 Specify the FTP site that will be the source of the software updates by entering
the following command:
repository source ftp://
source/path
where source is the hostname or IP address of the FTP server on which the image
resides and path is the path to the image files.
Task Reference
1. Back up WLSE. Backing Up the WLSE, page A-2
2. Download software from Cisco.com. Downloading the Upgrade Image, page A-2
3. Install software. To install from the local repository, see Installing from
the Local Repository, page A-4.
To install from the remote repository, see Installing from
a Windows Server, page A-6.