Filter
Top Products
Chapter 3 Installing WLSE 1130-19 Hardware
Next Step—Configuration
3-16
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Powering On the WLSE
To turn the WLSE’s power on, press the power switch. To turn its power off, press
and hold the power switch for at least four seconds. See Figure 1-1 on page 1-3
for the location of the power switch.
The system begins booting and sending messages to the console window. When
the login prompt appears, you can configure the system.
Next Step—Configuration
Run the setup program and perform basic configuration—See Chapter 4, “Basic
Setup—CiscoWorks 1105/1130/1130-19.”