Filter
Top Products
A-11
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Appendix A Installing Software—CiscoWorks 1105/1130/1130-19
Upgrade Methods
install:install list
Step 5 Enter the following command to install the software:
install:install update
package
where package is the name of the software image to be installed. For example, if
the ZIP file is called WLSE-2.5-K9.zip, the package name is WLSE-2.5-K9.
Result: The WLSE is reimaged and reboots.
Related CLI Commands
To delete images from the WLSE’s local repository, use the following command:
repository delete [
package
| all ]
where all deletes all images in the local repository, and package deletes the named
image only.
To change the status of the WLSE’s local repository, use the following command:
repository server [ stop | start | status ]
to stop, start, or display the status of the local repository. You can stop the
repository if you are not using it or if you have security concerns. The repository
will automatically restart if you reboot the WLSE.
Upgrading from the Recovery CD
You can use this method to upgrade from 1.x versions or 2.0.x versions to 2.7.
You can also use the recovery CD to downgrade to an earlier version
Note You cannot restore a backup from a WLSE 1130-19 or WLSE 1130 to a
WLSE 1105.
You can create a recovery CD by downloading the image from cisco.com at the
following URL: