Filter
Top Products
Chapter 1 Product Overview
Hardware Features—WLSE 1130-19
1-4
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
System Indicators
When troubleshooting your WLSE, you might need to check the status of the
indicators on the front panel. These lights are described in Table 1-1.
1 Power switch with built-in power
indicator
The power switch turns power on or
off. To turn system power off, press
and hold this switch for at least 4
seconds.
5 Ethernet 0 activity/link
indicator
2 Floppy disk drive 6 Ethernet 1 activity/link
indicator
3 CD-ROM drive 7 Hard drive indicator
4 Video output or USB port for optional
keyboard
Table 1-1 System Indicators
Indicator Color Function
Power Green The power indicator lights up when the WLSE is connected to an
AC power source.
Hard Drive activity Blue The hard drive activity indicator blinks when hard drive activity
occurs.
Ethernet 0
activity/link
Blue The Ethernet 0 activity/link indicator lights up when the
Ethernet 0 port is connected to a network and blinks when activity
occurs on this channel.
Ethernet 1
activity/link
Blue The Ethernet 1 activity/link indicator lights up when the
Ethernet 1 port is connected to a network and blinks when activity
occurs on this channel.