Filter
Top Products
5-27
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Chapter 5 Setting Up Devices—CiscoWorks 1105/1130/1130-19
Setting Up AAA Servers
Step 6 Click Add Entry. In the Add AAA Client area, enter the following WLSE
information:
Note If two Ethernet interfaces are configured with IP addresses on the WLSE,
both addresses must be configured as clients on ACS server.
Step 7 Select RADIUS (Cisco Aironet) from the Authenticate Using list.
Step 8 If you are using this server for Wireless Domain Services (WDS) authentication,
configure the server for simultaneous login sessions. See the ACS server
documentation for details.
Step 9 Click Submit or Submit+Restart. A restart is required for the changes to take
effect.
Field Description
Client Hostname WLSE hostname.
Client IP WLSE IP address.
1
1. If you are using redundant WLSEs, enter the VIP address. For more information about WLSE
redundancy, see the online help or the User Guide for the CiscoWorks Wireless LAN Solution
Engine, Release 2.7.
Key Secret key.
2
2. You will need this key when configuring the WLSE.