Filter
Top Products
96 CHAPTER 7: STANDARD FEATURES
groups that they belong to. All directly-dialed internal calls can still be
accepted by that member.
■ With a hunt group, the VCX User Interface Selective Ringing feature
allows you to change the default ring tone to one of 27 ring tones,
delay the ring for a specified number of seconds, or silence the ringer
and only allow the phone to flash.
■ A hunt group call can be added to a conference. The member
receiving the call can conference with another extension or with
another hunt group. Both announced and unannounced conferences
are supported (see Setting up a Conference Call
).
■ A hunt group call can be put on hold and taken off hold without
losing the caller.
■ If a hunt group member puts a call on hold, that member can
receive other calls.
■ A hunt group caller on hold will hear hunt group Music On Hold.
■ A hunt group call can be parked and then picked up by any user on
the same site.
■ If the VCX phone has Hands Free enabled, an incoming call to a hunt
group will not be picked up automatically.
■ A hunt group member’s personal phone settings (for example, Call
Forward, Call Coverage point, and Do Not Disturb) are not invoked on
Hunt Group calls.
■ An external call to a private user (someone not in the hunt group) can
be transferred to a hunt group.
■ Both attended and unattended call transfers are allowed for calls to a
hunt group or from a hunt group.
■ After reaching an Auto Attendant, a caller can enter a hunt group
extension and be transferred to a Hunt Group.
■ Internal and external callers that are forwarded to voice mail can leave
a message and navigate through the voice mail options.
■ If a hunt group call is routed to a voice mailbox or Auto Attendant call
coverage point but the routing fails (for example, because no ports are
available), the call is requeued for the hunt group.
■ Each time a call is put back in a hunt group queue, it is treated like a
new call.