Filter
Top Products
50 CHAPTER 5: BASIC TELEPHONE OPERATION
When you press a Volume Control button, the Display Panel shows the
volume setting as a series of dark vertical bars. Repeatedly pressing a
Volume Control button raises the volume (increases the number of
displayed bars) or lowers the volume (decreases the number of displayed
bars.
You can also use Feature Codes to adjust the volume. Pressing
Feature + 102 raises the volume (increases the number of displayed bars
by one). Pressing Feature + 103 lowers the volume (decreases the
number of displayed bars by one).
Using the Hands
Free Feature
You can use your phone as an intercom. You can answer internal
(intercom) calls without picking up the handset. When you receive an
internal call, your telephone sounds a tone and activates the speaker
phone.
You cannot use this feature with external calls (a call from outside your
local call processor) or Anonymous (blocked caller ID) calls. These calls
ring to your telephone as usual.
If your telephone is part of a bridged extension, see Hands Free and
Bridged Line Calls for additional information.
To enable or disable the Hands Free feature, press the HANDS FREE
button or the button on the phone before calls arrive. The red light
next to the button comes on (enabled) or goes out (disabled). You can
also enable and disable Hands Free by using Feature Code 100. See
Feature Codes
.
Using a Headset The Model 3102 Business Telephone has a headset jack located on the
underside of the telephone.
To prepare the headset for all calls:
1 Plug the headset connector into the headset jack on the underside of the
telephone.
2 Verify that the indicator light next to the Headset button comes on.