Filter
Top Products
Feature Codes 61
Feature + 446
or
*446
Then, either press Ok or press Feature + 120 to complete the command.
Some features require additional information. For example, if you want to
enable call forwarding when your phone is busy, you must designate the
extension to which you want your calls forwarded. The feature code for
Call Forward Busy is 467. To enable this feature, you can use the Feature
button or enter a single command (in the following examples, the
destination extension is 1001):
■ Use the Feature button:
Press Feature + 467.
The Display Panel displays the prompt
FWD Busy Number.
Enter the extension to which you want your calls forwarded, in this
case, 1001.
Press OK or #.
■ Enter the feature code and extension with a single command:
*467*1001
You must prepend the feature code with an asterisk (*) and
separate the feature code and extension with another asterisk.
Each element in a feature code command must be prepended with
an asterisk.
Some features occur within the bounds of an existing call, for example,
forwarding a call to the voice mail of another subscriber. In these cases,
the feature requires using the Transfer button. After pressing Transfer,
you enter the transfer destination in the format
*feature_code*<destination>.
Feature Codes Table 9 lists the features that you can control with feature codes. Features
are listed alphabetically and include the required feature code syntax and,
in most cases, a reference for more information. In the syntax, the