Filter
Top Products
112 CHAPTER 8: USING THE VCX USER INTERFACE
■ If the primary phone has Hands Free enabled, a call rings briefly on the
secondary phone before it is automatically answered by the primary
phone.
■ If the secondary phone has Hands Free enabled, only calls made to the
secondary's phone extension are answered Hands Free. Calls to
primary phone are not answered Hands Free on the secondary phone;
they appear as normal bridge calls.
Call Forward, Forward to Voice Mail, and Bridged Line Calls
Enabling Call Forwarding and Forward to Voice Mail (or enabling both
features) has the following effect on bridged calls:
■ If the primary phone enables Forward to Voice Mail, calls ring once on
the primary and secondary phones, and then go to voicemail.
■ If the primary phone enables Call Forward Universal, calls to the
primary go to the Call Forward Universal destination immediately and
do not ring on the primary or secondary phones.
■ If a secondary phone enables Forward to Voice Mail or Call Forwarding
to another extension, these settings affect only calls to the secondary
phone extension. A bridged call rings on both the primary phone and
secondary phone.
■ If a call is ringing on the primary phone and the secondary phone, and
the primary phone user presses the Forward to Voicemail button, the
call is forwarded to primary phone’s voice mailbox and the secondary
phone stops ringing.
■ If a call is ringing on the primary phone and the secondary phone, and
the secondary phone user presses the Forward to Voicemail button,
call will continue ringing on both phones.
Call Transfer, Call Conferencing, and Bridged Line Calls
Bridged calls can be transferred by either the primary phone or the
secondary phone. The primary phone user and secondary phone user can
also set up a conference with a bridged call.
If the primary phone is on a bridged call and presses the Transfer button,
the primary phone user hears a dial tone. The user can then enter a
telephone number to start attended or unattended call transfer. While
the primary phone user enters the phone number, the calling party is put
on hold. However, the light for BSA line on the secondary phone remains
on (does not blink as it would for a non-bridged call on hold).