Filter
Top Products
Assigning Model 2102 Access Button Functions Using the TUI 23
Your administrator may allow you to reprogram a button’s function (for
example, create more personal speed dial buttons). Consequently, a
programmable button is one of the following states:
■ Locked — Button function can be changed only by the administrator.
However, if the button function requires additional information (for
example, a speed dial number or a call forward destination number),
you can choose the values for the parameters. There are two
exceptions:
■ BLF (Busy Lamp Field) — Displays the status of another user's
phone. When you press the button associated with the BLF status
light, the BLF function calls the other user’s phone.
■ System Speed Dial — Dials an administrator-configured speed dial
number.
The additional information for these two functions is set by the
administrator and you cannot change the values if the buttons are
in the locked state.
■ Unlocked — Button function and any associated values can be
completely reconfigured by you or the administrator.
Note that, if a button function requires additional information (for
example, a call forward destination number) and you or your
administrator have not configured this information, the system will
prompt you for it when you press the button.
Default Model 2102
Button Assignments
As noted in Access Buttons
, the programmable Access buttons for the
Model 2102 phone are located in the right column of 12 buttons. The
buttons are numbered, bottom to top, 1 through 12. The default, 3Com
supplied button functions are shown in Table 4
. Ask your administrator if
these defaults have changed.
Table 4 3Com Default Button Mappings for the Model 2102 Telephone
Button Number Feature Additional Information
12 Do Not Disturb None
11 Call Forward All Destination number
10 Personal Speed Dial #1 First personal speed dial
number
9 Personal Speed Dial #2 Second personal speed dial
number