Filter
Top Products
36 CHAPTER 4: 3105 ATTENDANT CONSOLE
3105 Attendant
Console
The 3105 Attendant Console has 50 Access buttons and 4
preprogrammed Feature buttons. In effect, the Attendant Console is an
extension of the VCX Business Telephone or VCX Basic Telephone with
which it is associated.
Figure 5
illustrates the buttons and controls on the VCX 3105 Attendant
Console.
Access Buttons The 50 Access buttons on an 3105 Attendant Console can each have two
sets of assignments: 1 through 50, and 51 through 100. To toggle
between the two sets of assignments, press the Shift button.
Your administrator can assign features to each Access button. Possible
features include:
■ Status of internal telephone extensions (busy, available)
In the current release, when you assign a phone extension to an
Attendant Console button, the button assignment does not become
effective until either the Attendant Console is rebooted or the phone
registration interval elapses. The default registration interval is one hour
(3600 seconds).
■ Status of external telephone lines
■ Speed dials for user extensions:
Feature Buttons The four Feature buttons are programmed for four of the five most
common features needed by a receptionist: Call Transfer, Call Hold,
Conference, Call Park, or Attendant Serial Call. The Shift button does not
affect the operation of the Feature buttons. Your administrator
configures the feature assigned to a particular Feature button using the
VCX User Interface, Central Management Console. The feature-to-button
mappings described in the list following Figure 5
are the defaults and
may not correspond to your configuration.
Your administrator also maps telephone extensions to Access buttons
using the VCX Administrator web interface.
Figure 5
and the text that follows it describe the features on the 3105
Attendant Console.