Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
89
Figure 5-18 WAN – PPPoE/Russia PPPoE
¾ PPPoE Connection
z User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
¾ Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an
extra Connection type such as Dynamic/Static IP to connect to a local area network, then you
can check the radio button of Dynamic/Static IP to activate this secondary connection.
z Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
z Dynamic IP - Use dynamic IP address to connect to the local area network provided by
ISP.
z Static IP - Use static IP address to connect to the local area network provided by ISP.
¾ WAN Connection Mode
z Connect on Demand - You can configure the Device to disconnect your Internet
connection after a specified period of the Internet connectivity (Max Idle Time). If your
Internet connection has been terminated due to inactivity, Connect on Demand enables
the Device to automatically re-establish your connection when you attempt to access the
Internet again. If you wish to activate Connect on Demand, put a check mark in the circle.
If you want your Internet connection to remain active all the time, enter 0 in the Max Idle
Time field.