Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
86
5.6.1 LAN
Choose menu “Network > LAN”, and then you can configure the IP parameters of the LAN on the
screen as below.
Figure 5-15 LAN
¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can
not be changed.
¾ IP Address - Enter the IP address of your Device in dotted-decimal notation (factory default
192.168.1.254).
¾ Subnet Mask - An address code that determines the size of the network. Usually it is
255.255.255.0.
)
Note:
1. If you change the LAN IP address, you must use the new IP address to login to the Device.
2. If the new LAN IP address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically, but the Virtual Server and
DMZ Host will not take effect until they are re-configured.
5.6.2 WAN
Choose menu “Network > WAN”, and then you can configure the IP parameters of the WAN on
the screen below.
)
Note:
There are five WAN connection types in AP Client Router mode: Dynamic IP, Static IP, PPPoE,
L2TP, and PPTP; while there is one more type in AP Router mode, BigPond Cable.
1. If your ISP is running a DHCP server, select the Dynamic IP option. Then the Device will
automatically get IP parameters from your ISP. You can see the page as follow (Figure 5-16).