Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
22
Note Dialog
You can select one of the following security options:
z Disable Security- The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the AP without encryption. It is recommended
strongly that you choose one of the following options to enable security.
z WPA-PSK/WPA2-PSK- Select WPA based on pre-shared passphrase.
z PSK Password- You can enter ASCII or Hexadecimal characters.
For ASCII, the length should be between 8 and 63 characters.
For Hexadecimal, the length should be between 8 and 64 characters.
Please note that the key is case sensitive.
z Not Change- If you chose this option, wireless security configuration will not change.
4) Repeater
In Repeater mode, the AP with WDS enabled will relay data to an associated root AP. AP function
is enabled meanwhile. The wireless repeater relays signal between its stations and the root AP for
greater wireless range. Please input the MAC address of root AP in the field "MAC of AP".
Figure 3-15