Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
103
5.7.2 Wireless Security
Choose menu “Wireless > Wireless Security”, and then you can configure the security settings
of your wireless network.
There are three wireless security modes supported by the Device: WEP (Wired Equivalent
Privacy), WPA/WPA2 (Wi-Fi Protected Access/ Wi-Fi Protected Access 2), and
WPA-PSK/WPA2-PSK (Pre-Shared Key).
Figure 5-30 Wireless Security
) Note:
Only in Standard AP mode, the current operation mode is shown at the top. Besides, if Multi-SSID,
a sub mode of Standard AP, is selected, you can choose one of the 4 SSIDs from the pull-down
list.
You can select one of the following security options:
¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the AP without encryption. It is recommended
strongly that you choose one of following options to enable security.