TP-Link TL-WA7510N Wireless Office Headset User Manual


 
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
29
z Mode- This field determines the wireless mode which the Device works on.
z Max Tx Rate- You can limit the maximum tx rate of the Device through this field. You can
select one of security options listed as the below items.
z Disable Security- The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the Device without encryption. It is recommended
strongly that you choose one of the following options to enable security.
z WPA-PSK/WPA2-PSK- Select WPA based on pre-shared passphrase.
z PSK Password- You can enter ASCII or Hexadecimal characters.
For ASCII, the length should be between 8 and 63 characters.
For Hexadecimal, the length should be between 8 and 64 characters.
Please note that the key is case sensitive.
z Not Change- If you chose this option, wireless security configuration will not change.
¾ Dynamic IP- When the Device connects to a DHCP server, or the ISP supplies you with
DHCP connection, please choose this type. The Device will get the IP address automatically
from the DHCP server or the ISP if you choose the Dynamic IP type.
If you choose Dynamic IP in Figure 3-19 and then click Next, Figure 3-22 will appear.
¾ Static IP - In this type, you should manually fill in the IP address, Subnet Mask, Default
Gateway, and DNS IP address, which are specified by your ISP.
1) If you choose Static IP in Figure 3-19 and then click Next, Figure 3-23 will appear.
Figure 3-23
z IP Address- This is WAN IP address as seen by external users on the Internet (including
your ISP). Enter the IP address in the field.
z Subnet Mask- It is used for the WAN IP address, which is usually 255.255.255.0.
z Default Gateway- Enter the default gateway in the blank if required.
z Primary DNS- Enter the DNS IP address in the blank if required.
z Secondary DNS- If your ISP provides another DNS IP address, enter it in this field.
)
Note:
The IP parameters should have been provided by your ISP.