Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
18
Figure 3-12
z Wireless Radio- Enable or disable the wireless radio.
z SSID- Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all
wireless devices in your network. The default SSID is set to be TP-LINK _xxxxxx (xxxxxx
indicates the last unique six characters of each AP's MAC address), which can ensure your
wireless network security. But it is recommended strongly that you change your networks
name (SSID) to a different value. This value is case-sensitive. For example, MYSSID is NOT
the same as MySsid.
z Region- Select your region from the pull-down list. This field specifies the region where the
wireless function of the Device can be used. It may be illegal to use the wireless function of
the Device in a region other than one of those specified in this filed. If your country or region
is not listed, please contact your local government agency for assistance.
z When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog
z Channel- This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point. If you select auto, then the AP will select the best channel automatically.