Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
26
AP in a region other than one of those specified in this filed. If your country or region is not
listed, please contact your local government agency for assistance.
z When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog
z Channel- This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
z Mode-This field determines the wireless mode which the AP works on.
z Max Tx Rate- You can limit the maximum tx rate of the AP through this field.
z Enable SSID Broadcast- If you select the Enable SSID Broadcast checkbox, the AP will
broadcast its name (SSID) on the air.
z MAC of AP- Enter the MAC address of AP that you want to access. If you select the radio
button before MAC of AP, the AP client will connect to AP according to MAC address.
You can select one of the following security options:
z Disable Security- The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the AP without encryption. It is recommended
strongly that you choose one of the following options to enable security.
z WPA-PSK/WPA2-PSK- Select WPA based on pre-shared passphrase.
z PSK Password- You can enter ASCII or Hexadecimal characters.
For ASCII, the length should be between 8 and 63 characters.
For Hexadecimal, the length should be between 8 and 64 characters.
Please note that the key is case sensitive.
z Not Change- If you chose this option, wireless security configuration will not change.
2. Click Finish button in Figure 3-18 to complete the Quick Setup.
Figure 3-18