Filter
Top Products
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
6
¾ Access Point
This operation mode allows wireless stations to access.
Figure 2-1 Hardware Installation of the TL-WA7510N in Access Point mode
1. Connect the LAN port of TL-WA7510N to the POE port of the Power Injector with an Ethernet
cable.
2. Connect the LAN port of the Power Injector to the wired network port with an Ethernet cable.
3. Plug one end of the Power Adapter into the DC jack on the Power Injector, and the other end
in the electrical wall socket.
4. Power on the notebook(s) and other connected devices (such as the Router).
¾ Multi-SSID
In this mode, AP can support up to 4 SSID.